Jxf Lighting Box with Advanced Switchgear for Efficient Power Management

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCJXF01
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. This product thrives in ambient air temperatures not exceeding +40 °C and not dropping below -5 °C, while maintaining an average temperature not surpassing +35 °C over a 24-hour period.

2. At a maximum temperature of +40 °C, the relative humidity should remain below 50%, but can accommodate a higher relative humidity at lower temperatures, such as up to 90% at +20 °C.

3. The air must be clean, devoid of any corrosive, explosive gases, and free from conductive or insulating dust particles.

4. Ensure the installation is vertical without significant shaking or shock vibration, and the inclination stays within a 5-degree limit.

5. Operable at altitudes up to 2000 meters.

6. The switch cabinet can be transported and stored in temperatures ranging from -25 °C to +55 °C, with a short-term maximum of +70 °C for no more than 24 hours.

7. Should these conditions not be met, customers are advised to consult with the manufacturer for tailored solutions.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A diagram of the main circuit distribution system's phase layout, including details on rated working voltage and current, protection devices, and necessary technical parameters.

2. Specifications of both incoming and outgoing cables must be clearly indicated.

3. Specify the model, specification, and quantity of all primary electrical components within the differential cabinet.

4. For bus extrusion or bus duct requirements between cabinets, provide detailed specifications including span and height from the ground.

5. If the switch cabinet is to be used under unique environmental conditions, such details must be explicitly stated upon ordering.

6. Indicate the desired surface color of the switch cabinet along with any other specific requirements.