Reliable Meter Box for Safe and Efficient Distribution of Power

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCJXF01
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature for optimal performance should never exceed +40°C, nor fall below -5°C, with an average not surpassing +35°C over any 24-hour period.

2. At peak temperatures of +40°C, the relative humidity should not exceed 50%. However, at cooler temperatures, a higher humidity level is acceptable, such as up to 90% humidity at +20°C.

3. Ensuring a pristine environment is key, with air that is free from corrosive and explosive gases and devoid of conductive and insulating dust.

4. In environments free from excessive shaking and vibrations, vertical installation is recommended, with an inclination not exceeding 5 degrees to maintain stability.

5. For optimum operation, ensure the altitude does not exceed 2000 meters above sea level.

6. The switch cabinet is engineered to endure transportation and storage temperatures ranging from -25°C to +55°C, with temporary tolerance for up to +70°C for no more than 24 hours.

7. Should these conditions be unattainable, a discussion with the manufacturer is essential to accommodate particular needs.

About Us

Ordering Instructions

When placing an order, please ensure to provide:

1. A comprehensive main circuit distribution system diagram, including phase layout, rated working voltage, current specifications, and current protection device parameters.

2. Clearly detail the specifications of both incoming and outgoing cables for seamless integration.

3. Specify the model, specifications, and quantity of primary electrical components required in the differential cabinet.

4. If bus extrusion or bus ducting is required between switch cabinets or incoming cabinets, include precise measurements such as span and height from ground level.

5. For applications requiring special environmental conditions, detailed specifications should accompany the order.

6. Specify the desired surface color of the switch cabinet and any other particular requirements you may have.