Premium Protective Devices Cable Distribution Box for Enhanced Insulation

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should ideally remain within a comfortable range, not exceeding +40 °C or dropping below -5 °C, with the average temperature maintained below +35 °C over a 24-hour period.

2. The relative humidity should not surpass 50% when the temperature is at its peak of +40 °C. A higher relative humidity is permissible at lower temperatures, reaching up to 90% at +20 °C.

3. Ensure the air is clean, devoid of any corrosive, explosive gases, and free from conductive or insulating dust to maintain optimal operational conditions.

4. The product is suited for environments free of significant shaking or shock vibrations. For optimal performance, it should be installed vertically with an inclination not exceeding 5 degrees.

5. The installation site should not exceed an altitude of 2000 meters above sea level to ensure effective functionality.

6. During transportation and storage, the switch cabinet can withstand a temperature range from -25 °C to +55 °C, with short-term exposure (not exceeding 24 hours) to temperatures up to +70 °C.

7. Should these conditions be unattainable, users are encouraged to engage in discussions with the manufacturer to find suitable solutions.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. The main circuit distribution system diagram, including phase layout. Specify rated working voltage, current, protection device walking current, and any other necessary technical parameters.

2. Clearly specify the specifications for both incoming and outgoing cables to ensure compatibility and optimal performance.

3. List the model, specification, and quantity of the primary electrical components within the differential cabinet to facilitate accurate assembly and production.

4. If bus extrusion or bus duct is required between the switch cabinets or incoming cabinets, provide specific data such as span and height from the ground to ensure precise installation.

5. For use in specialized environments, detailed specifications should be clearly stated when placing an order to ensure the product meets unique requirements.

6. Specify the surface color of the switch cabinet and any other particular requirements to guarantee that the final product aligns perfectly with your preferences.