Ggd Enhanced Electrical Switchgear for Low Voltage Power Distribution Systems

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCGGD01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should range between a maximum of +40°C and a minimum of -5°C. To ensure optimal performance, the average temperature over a 24-hour period should not exceed +35°C.

2. Designed for indoor installation, this product is suitable for locations with an altitude not exceeding 2000 meters.

3. Relative humidity should remain below 50% at the maximum temperature of +40°C, with allowances for higher humidity at reduced temperatures, such as 90% at +20°C. Consideration must be given to potential condensation caused by temperature fluctuations.

4. Installation requires that the equipment's tilt relative to the vertical plane does not exceed 5% to maintain stability.

5. Install the equipment in a stable environment free from severe vibration and impact, ensuring that all electrical components are safeguarded against corrosion.

6. For any bespoke requirements, please engage in discussions with the manufacturer to reach a suitable resolution.

Customizable products

About Us

Ordering Instructions

When placing an order, ensure you provide the following:

1. A comprehensive main circuit distribution system diagram with phase layout. Include rated working voltage and current, protection device thresholds, and all necessary technical specifications.

2. Clearly specify the specifications for incoming and outgoing cables to ensure compatibility.

3. Detail the model, specifications, and quantities of the primary electrical components required within the differential cabinet.

4. Should bus extrusion or a bus duct be necessary between switch cabinets or incoming cabinets, please provide precise data for span and elevation above the ground.

5. For usage under unique environmental conditions, please include detailed requirements with your order.

6. Specify the desired surface color of the switch cabinet and disclose any other specific preferences.