Enhanced Transformer Substation for Efficient Electrical Distribution Systems

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCEuro01
• Voltage Level: High Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -15ºC-50ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should never rise above +40°C nor fall below -5°C. Furthermore, the average temperature over a 24-hour span must not exceed +35°C.

2. Designed for seamless indoor installation, the altitude of the operational site should remain below 2000 meters.

3. The relative humidity in the surrounding air must not surpass 50% when the temperature peaks at +40°C. However, a higher relative humidity is permissible at reduced temperatures. For example, humidity can reach up to 90% at +20°C, with considerations for occasional condensation due to temperature fluctuations.

4. Ensure that the equipment's inclination relative to a vertical plane does not exceed 5% during installation.

5. Always install the equipment in areas free from severe vibration and impact, and ensure the site is protected from corrosive elements that may affect electrical components.

6. Should users have unique requirements, it's advised to engage in discussions with the manufacturer to devise suitable solutions.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A detailed main circuit distribution system diagram and phase layout diagram, including rated working voltage, current, protection device specifications, and any necessary technical parameters.

2. Clearly specify the specifications of both incoming and outgoing cables.

3. Specify the model, specification, and quantity of the primary electrical components housed in the differential cabinet.

4. If a bus extrusion or bus duct is required between switch cabinets or incoming cabinets, please provide specific data points such as span and height from the ground.

5. Any special environmental conditions which affect the switch cabinet usage should be detailed when placing the order.

6. Specify the surface color of the switch cabinet along with any additional specific requirements.