Reliable Distribution Box with Circuit Breaker for Optimal Power Distribution

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCJXF01
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. To ensure optimal performance, the ambient air temperature should not exceed +40 °C or drop below -5 °C. The average temperature over 24 hours must remain under +35 °C;

2. At the maximum temperature of +40 °C, the relative humidity should not exceed 50%. However, higher humidity is permissible at lower temperatures, allowing for 90% at +20 °C;

3. The environment must have clean air, free from any corrosive or explosive gases, and devoid of conductive or insulating dust;

4. Designed for stable environments with minimal shaking and vibration. Ensure vertical installation with an inclination no greater than 5 degrees;

5. The installation site should not surpass an altitude of 2000 meters;

6. For transportation and storage, the switch cabinet is adaptable to temperatures between -25 °C and +55 °C, with a temporary tolerance up to +70 °C for no more than 24 hours;

7. Should these conditions be unattainable, users must engage in discussions with the manufacturer to explore possible solutions.

About Us

Ordering Instructions

When placing an order, users should provide the following details:

1. A detailed main circuit distribution system diagram, including phase layout, rated working voltage, current, protection device operating current, and all vital technical parameters.

2. Clear specifications for both incoming and outgoing cables must be indicated.

3. Specify the model, specifications, and quantities of all main electrical components within the differential cabinet.

4. If the installation requires bus extrusion or bus duct between switch cabinets or incoming cabinets, precise data such as span and ground height must be detailed.

5. For applications under unique environmental conditions, it is essential to provide detailed information at the time of order.

6. Specify the desired surface color of the switch cabinet along with any other specific requirements.