Innovative Zigbee Circuit Breakers for Smart Home Energy Management

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCNFW01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should gracefully align between a maximum of +40 °C and a minimum of -5 °C, ensuring an average of no more than +35 °C over the span of 24 hours;

2. Relative humidity should not exceed 50% at the peak temperature of +40 °C. However, an increased relative humidity is permissible at lower temperatures, reaching up to 90% at +20 °C;

3. The air must remain pristine and pure, free from corrosive, explosive gases, and devoid of conductive or insulating dust;

4. Ensure installation occurs without pronounced shaking or shock vibration, maintaining a vertical position with an inclination not surpassing 5 degrees;

5. Installation altitude is confined to a maximum of 2000 meters;

6. The switch cabinet is meticulously crafted to endure transport and storage temperatures ranging from -25 °C to +55 °C, withstanding up to +70 °C over short durations not exceeding 24 hours;

7. Should these stipulated conditions be unattainable, users are encouraged to engage in negotiations with the manufacturer.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A comprehensive main circuit distribution system diagram, including phase layout, rated working voltage, current, and protection device current, along with essential technical parameters.

2. Specify the precise specifications of incoming and outgoing cables.

3. Detail the model, specifications, and quantity of the primary electrical components housed within the differential cabinet.

4. If a bus extrusion or duct is required between the switch cabinets or incoming cabinets, specify data such as span and height from the ground.

5. Clearly outline any special environmental condition requirements for the switch cabinet in your order.

6. Specify the desired surface color of the switch cabinet along with any other particular requirements.