Dfw Euro Cable Distribution Box

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature is not higher than +40 °C, not lower than -5 °C, and the average temperature is not higher than +35 °C in 24 hours;

2. The relative temperature is not more than 50% at the maximum temperature +40 °C, and a higher relative temperature is allowed at the lower temperature, such as 90% at +20 °C;

3. Clean air, no corrosive and explosive gases, no conductive and insulating dust;

4. In the case of no significant shaking and shock vibration, vertical installation, the inclination should not be greater than 5 degrees;

5. The altitude does not exceed 2000 meters;

6. The switch cabinet is suitable for the following temperature transportation and storage: -25 °C to +55 °C, not more than +70 °C in a short time (no more than 24 hours);

7. If the above conditions cannot be met, the user shall negotiate with the manufacturer.

 

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. Main circuit distribution system diagram phase layout diagram. Rated working voltage, rated working current, protection device walking current and necessary technical parameters.

2. Indicate the specifications of incoming and outgoing cables.

3. The model, specification and quantity of the main electrical components in the differential cabinet.

4.  If the bus extrusion or bus duct is required between the switch cabinets or the incoming cabinets, the specific required data such as span and height from the ground shall be indicated.

5.  When the switch cabinet is used under special environmental conditions, it should be detailed when ordering.

6.  Surface color of the switch cabinet and other specific requirements.