Heavy Duty Armoured Switchgear for Enhanced Safety in Electrical Installations

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCGKYN01
• Voltage Level: High Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -15ºC-50ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 2625mm*1400mm*2855mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature for optimal operation should remain within a range of +40°C to -5°C, with a crucial 24-hour average not exceeding +35°C.

2. Designed exclusively for indoor use, this product performs best when installed at altitudes not exceeding 2000 meters.

3. Ensure the relative humidity around the equipment doesn't surpass 50% at +40°C. At cooler temperatures, higher humidity levels, up to 90% at +20°C, are permissible, provided condensation from temperature variations is managed.

4. Maintain a minimal inclination; the equipment should be installed with a tilt of no more than 5% relative to the vertical plane.

5. For optimal performance, install the equipment in locations free from severe vibrations, impacts, and corrosive elements.

6. For any special requirements not covered here, please engage in direct consultation with the manufacturer for tailored solutions.

Customizable products

About Us

Ordering Instructions

When placing an order, please provide the following details:

1. A detailed main circuit distribution system diagram including phase layout, along with specifications such as rated working voltage, current, protection device settings, and all necessary technical parameters.

2. Clearly indicate the specifications for both incoming and outgoing cables.

3. Specify the model, specification, and quantity of primary electrical components required in the differential cabinet.

4. If bus extrusion or bus ducts are necessary between switch cabinets or incoming cabinets, specify all relevant data, including span and height from the ground.

5. Detail any special environmental conditions under which the switch cabinet will operate at the time of ordering.

6. Specify the surface color and any other specific requirements for the switch cabinet.