Insulated Circuit Breaker Distribution Box with 5000A Operating Current

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should remain comfortably between -5 °C and +40 °C, ensuring the average temperature over a 24-hour period does not exceed +35 °C.

2. Maintain a relative humidity not exceeding 50% at +40 °C. At lower temperatures, such as +20 °C, levels as high as 90% are permissible, offering flexibility in varied climates.

3. The air must be clean, devoid of corrosive, explosive gases, and free from conductive or insulating dust for optimal safety and performance.

4. Installation should be vertical without significant shaking or shock vibrations, and the inclination angle must not exceed 5 degrees, ensuring stability.

5. Elevation should be kept below 2000 meters to maintain the product's performance efficiency.

6. For transportation and storage, the switch cabinet withstands temperatures from -25 °C to +55 °C, with short-term tolerance (up to 24 hours) up to +70 °C.

7. If your conditions fall outside these parameters, please discuss custom solutions directly with the manufacturer to tailor the product to your needs.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A detailed main circuit distribution system diagram with phase layout, including rated working voltage, current, protection device settings, and all necessary technical specifications.

2. The specifications for both incoming and outgoing cables must be clearly identified to ensure proper compatibility and function.

3. Specify the model, specification, and quantity of the primary electrical components within the differential cabinet.

4. For bus extrusion or bus duct requirements between switch or incoming cabinets, provide specific data such as span and height from the ground to ensure accurate implementation.

5. If utilizing the switch cabinet in special environmental conditions, these details should accompany your order for precise customization.

6. Specify the surface color and any other specific requirements of the switch cabinet to tailor the product to your preferences.