Innovative Electrical Switchgear for Enhanced Low Voltage Power Management

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCGGD01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should remain within a comfortable range, not exceeding +40°C nor dropping below -5°C. Additionally, the average temperature within a 24-hour period must remain below +35°C.

2. Designed for indoor use, this product performs best when installed at altitudes not exceeding 2000 meters.

3. At a maximum temperature of +40°C, the relative humidity should not surpass 50%. However, at lower temperatures, higher humidity levels are permissible, such as 90% at +20°C. Be mindful of occasional condensation effects due to temperature fluctuations.

4. Ensure that the equipment's installation maintains an inclination of no more than 5% relative to the vertical plane.

5. This equipment is suited for environments free from severe vibration and impact, and where electrical components are non-corrosive.

6. For users with special requirements, we encourage negotiation with the manufacturer to find tailored solutions.

Customizable products

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. Main circuit distribution system diagram, phase layout, rated working voltage, current, protection device settings, and all necessary technical parameters.

2. Specify the specifications of both incoming and outgoing cables to ensure compatibility.

3. The model, specifications, and quantities of the primary electrical components required in the differential cabinet should be clearly stated.

4. If bus extrusion or ducting between switch or incoming cabinets is needed, provide specific data, including span and height from the ground.

5. Detail any special environmental conditions the switch cabinet will operate under during the order process.

6. Specify the surface color of the switch cabinet along with any other particular requirements you might have.