Reliable Isolator Distribution Box for Low Voltage Applications

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. Ensure the ambient air temperature remains within the optimal range: not exceeding +40 °C, not dropping below -5 °C, and maintaining an average temperature below +35 °C over a 24-hour period;

2. The relative humidity should not exceed 50% at the maximum temperature of +40 °C, with allowance for higher humidity at lower temperatures, such as up to 90% at +20 °C;

3. The environment must be clean, free of corrosive, explosive gases, and devoid of conductive and insulating dust;

4. The installation should be vertical without significant shaking or shock vibration, maintaining an inclination of less than 5 degrees;

5. Ensure the installation altitude does not surpass 2000 meters;

6. The switch cabinet is designed for safe transportation and storage under temperatures ranging from -25 °C to +55 °C, with short-term exposure (under 24 hours) permissible up to +70 °C;

7. Should the specified conditions be unmet, discussions with the manufacturer are necessary for tailored solutions.

About Us

Ordering Instructions

When placing an order, please ensure to provide the following details:

1. Detailed diagrams of the main circuit distribution system, including phase layout, rated working voltage and current, protection device current, and all necessary technical parameters.

2. Clearly indicate the specifications for both incoming and outgoing cables.

3. Specify the model, specifications, and quantity of the primary electrical components within the differential cabinet.

4. If bus extrusion or bus ducting is necessary between cabinets, provide detailed specifications such as span and height from ground level.

5. For usage under special environmental conditions, a detailed description should be provided at the time of ordering.

6. Indicate the desired surface color of the switch cabinet along with any other specific requirements.