Innovative Switchgear Cable Distribution Box for Enhanced Circuit Protection

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCDFV01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should remain within a comfortable range, not exceeding a warm +40 °C, not dropping below a brisk -5 °C, and ensuring an average temperature doesn't go past +35 °C over any 24-hour period;

2. Maintain the relative humidity at a manageable level, not surpassing 50% when the temperature reaches its peak at +40 °C, while accommodating higher humidity at cooler temperatures, such as a generous 90% at +20 °C;

3. The air should be pristine, devoid of any corrosive or explosive gases and free from conductive or insulating dust particles;

4. Ensure stability by avoiding environments with significant shaking or shock vibrations. Opt for a vertical installation with an inclination no greater than a gentle 5 degrees;

5. The installation site should not exceed an elevation of 2000 meters to maintain optimal functionality;

6. The switch cabinet is designed to withstand a range of temperatures during transportation and storage, from a chilly -25 °C to a sweltering +55 °C, with brief exposures (not over 24 hours) up to +70 °C;

7. If these ideal conditions cannot be achieved, it's crucial to consult and negotiate with the manufacturer for alternative arrangements.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A comprehensive main circuit distribution system diagram with phase layout, including rated working voltage, current, protective device current, and any necessary technical parameters.

2. Clearly state the specifications of both incoming and outgoing cables to ensure compatibility.

3. List the model, specification, and quantity of the primary electrical components within the differential cabinet to facilitate accurate assembly.

4. If bus extrusion or bus duct connections are needed between switch cabinets or incoming cabinets, specify essential data such as span and height from the ground for precision.

5. For use of the switch cabinet under special environmental conditions, include detailed specifications at the time of ordering to tailor the solution to your needs.

6. Specify the desired surface color of the switch cabinet along with any other particular requirements to ensure full satisfaction.