High-Performance Low Voltage Switchgear with Advanced Protective Devices

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCGGD01
• Voltage Level: Low Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature should be maintained between a maximum of +40°C and a minimum of -5°C. Furthermore, the average temperature over any 24-hour period must not exceed +35°C.

2. Designed for indoor installation, this equipment should be used at altitudes not exceeding 2000 meters above sea level.

3. The relative humidity of the ambient air should not surpass 50% at a maximum temperature of +40°C. Higher relative humidity levels are permissible at cooler temperatures, such as 90% at +20°C, although attention must be paid to the potential for condensation due to fluctuating temperatures.

4. During installation, ensure that the equipment remains no more than 5% inclined from the vertical plane.

5. The installation site should be free from severe vibrations and impacts, and devoid of conditions that could lead to the corrosion of electrical components.

6. For users with specific requirements, engaging in discussions with the manufacturer for tailored solutions is recommended.

Customizable products

About Us

Ordering Instructions

When placing an order, please ensure the following information is provided:

1. A comprehensive main circuit distribution diagram, including phase layout, rated working voltage and current, protection device parameters, and any necessary technical specifics.

2. Clearly specify the specifications for incoming and outgoing cable connections.

3. Provide the model, specification, and quantity of primary electrical components to be included within the differential cabinet.

4. If there is a requirement for bus extrusion or bus duct between switch cabinets or incoming cabinets, please provide specific measurements such as span and elevation from the ground.

5. For switch cabinets intended for use in unique environmental conditions, please detail these conditions at the time of order.

6. Specify the desired surface color of the switch cabinet along with any other particular requirements.