Intelligent Electric Switch Breakers for Enhanced Home Safety Solutions

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCNFW01
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -5ºC-40ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Specification: 1000mm*600mm*2200mm
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The device is designed to operate efficiently within an ambient temperature range, not exceeding +40 °C and not dropping below -5 °C, with an average temperature limit of +35 °C over a 24-hour period.

2. Relative humidity should not exceed 50% when at the peak temperature of +40 °C. However, a higher relative humidity is permissible at reduced temperatures, such as 90% at +20 °C.

3. The air should be free of pollutants, specifically lacking in corrosive and explosive gases, as well as conductive and insulating dust.

4. The installation should be vertical, avoiding areas with significant shaking or shock vibration, with an inclination not exceeding 5 degrees.

5. The product is suitable for use at altitudes of up to 2000 meters.

6. For transportation and storage, the switch cabinet should be maintained within a temperature bracket of -25 °C to +55 °C, and can withstand up to +70 °C for short durations (not exceeding 24 hours).

7. If conditions differ from those specified, users are encouraged to discuss alternative solutions with the manufacturer.

About Us

Ordering Instructions

When placing an order, users are requested to provide:

1. A detailed diagram of the main circuit distribution system, including phase layout, rated working voltage, current specifications, and essential technical parameters for the protection device.

2. Specifications for both incoming and outgoing cables should be clearly indicated.

3. The model, specification, and quantity of primary electrical components within the differential cabinet should be specified.

4. If bus extrusion or bus duct connections are required between switch cabinets or incoming cabinets, specific data such as span and ground height must be provided.

5. Any special environmental conditions under which the switch cabinet is to be used should be detailed at the time of ordering.

6. Details about the surface color of the switch cabinet and any other specific requirements should be clearly stated.