Insulated Transformer Substation with Circuit Breaker and Isolator Protection

• Customization: Available
• Certification: ISO9001
• Shell Material: Steel Plate
• Model NO.: NCEuro01
• Voltage Level: High Voltage
• Installation: Fixed
• Structure: Cabinet
• Current: AC
• Output Frequency: 50Hz
• Operating Voltage: 380V
• Operating Current: 5000A
• Use Environment: -15ºC-50ºC
• Warranty: 24 Months
• Transport Package: Standard Export Wooden Box with Pallet
• Trademark: Newcom
• Origin: Fujian, China
• HS Code: 8504409999
• Production Capacity: 2000pieces/Month

Product Description

Product Description

Use Environment

1. The ambient air temperature must always remain within an optimal range, not exceeding +40°C and not dipping below -5°C. Furthermore, it is imperative that the average temperature over a span of 24 hours remains within a comfortable limit, never surpassing +35°C.

2. Designed for seamless indoor installation, it is crucial that the altitude at the installation site does not exceed 2000 meters above sea level.

3. The air surrounding the equipment should maintain a relative humidity level of no more than 50% at the peak temperature of +40°C. However, at reduced temperatures, higher humidity levels are permissible, reaching up to 90% at +20°C. It's important to consider the potential for occasional condensation caused by temperature fluctuations.

4. To ensure optimal performance, the equipment should be installed with an inclination to the vertical plane that does not exceed a 5% gradient.

5. The installation site must be free from severe vibrations and impacts. Additionally, the environment should be such that the electrical components are not susceptible to corrosion.

6. If the user has any special requirements, we encourage proactive discussions with the manufacturer to address and resolve them effectively.

About Us

Ordering Instructions

When placing an order, the User shall provide:

1. A comprehensive main circuit distribution system diagram, including phase layout. Essential details such as rated working voltage, current, and protection device walking current along with necessary technical specifications are required.

2. Clearly specify the specifications of both incoming and outgoing cables, ensuring all details are accurately communicated.

3. Provide the model, specification, and quantity of principal electrical components housed within the differential cabinet.

4. If there's a need for bus extrusion or bus ducts between switch cabinets or incoming cabinets, it's crucial to specify the necessary data, such as span and the height from the ground.

5. For switch cabinets that will be used in special environmental conditions, detailed specifications should be provided at the time of ordering.

6. The desired surface color of the switch cabinet and any other specific requirements should be clearly indicated.