Customization: | Available |
---|---|
Certification: | ISO9001 |
Shell Material: | Steel Plate |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
1.The cabinet body of the GGD AC low-voltage distribution cabinet adopts the general rejection type, and the frame is partially welded and assembled with 8MF cold-formed steel, and the steel is supplied by the designated production plant to ensure the accuracy and quality of the rejection.
The parts of the universal cabinet are designed according to the modular principle and have 20 mold mounting holes. The high versatility coefficient allows the factory to achieve pre-production, which not only shortens the production and manufacturing cycle, but also provides work efficiency.
2.The design of the GGD cabinet fully considers the heat dissipation problem in the operation of the cabinet. There are different numbers of heat dissipation slots at both ends of the cabinet, when the electrical components in the cabinet are heated, the heat rises, and is discharged through the upper slots, and the cold air is continuously supplemented into the cabinet by the lower slots, so that the sealed cabinet body is shaped into a natural air duct from bottom to top, so as to achieve the purpose of heat dissipation.
3.In accordance with the requirements of modern industrial product design, the GGD cabinet adopts the method of golden ratio to design the appearance of the cabinet and the division size of each part, so that the whole cabinet is beautiful and generous, and has a new look.
4.The cabinet door is connected with the hook frame with a rotating hinge movable hinge, which is easy to install and disassemble, and the folding edge of the door is embedded with a mountain-shaped rubber and plastic strip, and the embedded strip between the door and the frame has a fixed compression stroke when the door is closed, which can prevent the door from colliding directly with the cabinet, and also improves the protection level of the door.
5.The instrument door equipped with electrical components is connected with the frame with multi-strand soft copper wire, and the mounting parts in the cabinet are connected with knurled screws between the cabinet shelf, and the whole cabinet constitutes a complete grounding protection circuit.
6.The surface of the cabinet body is sprayed plastic, with strong adhesion and good texture, and the whole cabinet is matte to avoid the resident effect, creating a more comfortable visual environment for the staff on duty.
7.The top cover of the cabinet can be removed when needed, which is convenient for the assembly and adjustment of the main bus on site, and the four corners of the cabinet top are equipped with lifting rings for lifting and shipment.
8.The protection level of the cabinet is IP30, and the user can also choose between IP2O and IP40 according to the requirements of the use environment.
When placing an order, the User shall provide:
1. Main circuit distribution system diagram phase layout diagram. Rated working voltage, rated working current, protection device walking current and necessary technical parameters.
2. Indicate the specifications of incoming and outgoing cables.
3. The model, specification and quantity of the main electrical components in the differential cabinet.
4. If the bus extrusion or bus duct is required between the switch cabinets or the incoming cabinets, the specific required data such as span and height from the ground shall be indicated.
5. When the switch cabinet is used under special environmental conditions, it should be detailed when ordering.
6. Surface color of the switch cabinet and other specific requirements.